Product description: UV cross-linked low smoke halogen-free flame retardant PE
Main application: Color cable only (not available in black)
Flammability rating: Passed IEC60332 single cable vertical burning, C-type bunch burning test
Temperature class: 105℃
Features: Excellent mechanical properties, electrical properties,flame retardant performance and processing performance. Burning without halogen acid gas, very little releasing of toxicity and corrosion gas, and with little smoke.
PS：We can provide you with free samples for evaluation and test, please feel free to contact us
EP8400X105J-1 temperature resistance is 105℃, with excellent Mechanical properties, electrical properties, flame retardant performance and processing performance.
XLPE Granule
Indoor Colored Wire——XLPE Product
Wire & Cable
Application: Color cable only (not available in black)
Multiple certification guarantee
Reach Certification,
RoHs Certification,
ISO9001:2015 Certification,
IATF16949:2016 Certification, etc.
XLPE
Flame retardant performance: Meet the requirements of IEC 60332 single cable vertical burning.
Temperature: 105°C
Characteristic: excellent Mechanical properties, electrical properties, flame retardant performance and processing performance.
| Properties | Test Standards | Units | UV XLPE (Low smoke HFFR ) | |
| Density | ASTM D-792 | g/cm3 | 1.49 | |
| Shore Hardness D | ASTM D 2240 | -- | 51 | |
| Tensile Strength | IEC 60811-1-1 | MPa | 11.5 | |
| Elongation | % | 185 | ||
| Aging 136℃×168h | Tensile strengthretention | IEC 60811-1-2 | MPa | 13.5 |
| Elongationretention | % | 169 | ||
| Thermal extension（200℃, 0.2MPa, 15min） | Elongation underloading | IEC 60811-2-1 | % | 55 |
| Permanent deformation aftercooling | % | 3 | ||
| -20℃Brittle temperature | IEC60811-1-4 | -- | Pass | |
Combustion performance
| Properties | Test Standards | Units | UV XLPE (Low smoke HFFR ) | |
| Oxygen index | ASTM D2863 | % | 34 | |
| Smoke density | Flaming | ASTM E-662 | — | 65 |
| Non-Flaming | — | 225 | ||
| pH | IEC 60754-2 | — | 5.2 | |
| Electrical conductivity | μS/mm | 2 | ||
| Toxicity index | NES 713-1985 | — | 1 | |
| Halogen acid gas evolution | IEC 60754-1 | mg/g | 0 | |
Others
| Properties | Test Standards | Units | UV XLPE (Low smoke HFFR ) |
| Dielectric strength | IEC 60243 | kV/mm | 35 |
| Resistivity at（20℃） | IEC 60093 | Ω.m | 2.5×10 12 |
| Thermal Shock（150℃×1 h） | IEC 60811-3-1 | -- | Pass |
| Hear shrinkage（100℃×1 h） | IEC 60811-1-3 | % | 1.0 |
Extruder:
L/D ration: between 18:1～25:1 Screw compression: between 1.1～2.0 Single screw thread
Extrusion Recommendation
| Gate | Die | Neck | Zone 3 | Zone 2 | Feed |
| 145℃ | 145℃ | 140℃ | 135℃ | 120℃ | 100℃ |
Ultraviolet Radiation Cable Crosslinking Equipment: Normal UV radiation cable crosslinking equipment.
Extrusion Speed: Depends on different colors. Especially production rate of blue color reduces.
Comparison Table of production speed and thermal extension of UV cross-linked
low-smoke halogen-free flame retardant polyolefin cable material (For reference only)
| Conductor cross section （ mm² ） | Nominal thickness of insulation （ mm ） | Production speed （ m/min ） | Thermal extension （ % ） |
| 1.5 | 0.7 | 100~140 | 50~100 |
| 2.5 | 0.8 | 80~120 | 50~90 |
| 4.0 | 0.8 | 80~120 | 50~90 |
| 6.0 | 0.9 | 50~70 | 60~100 |
| 10.0 | 1.0 | 30~45 | 60~100 |
Remark: When red, yellow, blue and green master batches are used, the production speed will be reduced by about 10~15%.
Color master batches added quantity should not exceed 0.4%.
Indoor colored cables——XLPE Product
Indoor colored cables——XLPE Product
Indoor colored cables——XLPE Product
Indoor colored cables——XLPE Product
Estimados clientes, no deben preocuparse por los colores de sus productos, POLYROCKS tiene un departamento profesional de combinación de colores, que brinda un servicio gratuito de combinación de colores. Cualquier requisito de color, por favor contáctenos por correo electrónico: sales@polyrocks.com .
POLYROCKS se enfoca en brindar un rápido servicio pre / postventa, contamos con ingenieros profesionales de moldeo por inyección e ingenieros de servicio técnico para brindar información precisa y un servicio oportuno. Cualquier pregunta o necesidad, puede contactarnos por correo electrónico: sales@polyrocks.com .
Cualquier pregunta de compra, bienvenido a ponerse en contacto con nuestro servicio de atención al cliente, la ayudarán.
Copyright © POLYROCKS CHEMICAL CO., LTD. Reservados todos los derechos |
Mapa del sitio
| Distribuido por
CONTÁCTENOS
FORMULARIO DE CONSULTA RÁPIDA
*Indicar campos obligatorios
